How to move a Hot Tub

How to Move a Hot Tub

The hot tub can be a wonderful addition to any backyard. But it’s also very bulky and heavy, so moving it can be difficult. Here are some tips for safely relocating your hot tub from one location to another.

  • Make sure the area where you want to move the hot tub is clear of debris like rocks or sticks that could puncture the liner.
  • Use a rope or bungee cords to secure the hot tub cover tightly in place to prevent water from leaking out during moving the hot tub.

How to Move a Hot Tub

Tools for moving a hot tub

The hot tub is one of the most luxurious items that you can install in your backyard. So, when you decide it’s time to move it somewhere else, you might be worried about how to do so without damaging it or yourself! Luckily, there are a few different tools and techniques out there that will make this process much easier.

Some people are not sure what tools they need to move a hot tub. This article will give you the basics of what tools are required to move a hot tub, and provide some tips on how to transport it.

The first thing you will need is a vehicle to transport your hot tub. Unless you have an extra-large SUV or truck, the best place to put your new spa is in the back of an open-box trailer. Make sure that your vehicle has a hitch and tow bar installed before purchasing or borrowing one.

The first thing you’ll want to do is to find a place to move the hot tub. You can use a trailer or truck bed if you have one available, but don’t put it on any surface like asphalt or concrete.

Things you need to move a hot tub

Moving a hot tub is a difficult and expensive process. If you are looking to move your hot tub, you will need people willing to help, a truck, and some tools. You may also think about hiring a moving company for the day, or budgeting for the cost of renting a U-Haul truck.

First, get some friends together to help you on the day of the move. You will need at least four people; two people to keep the hot tub level while it’s in transit, and two people to help with lifting and carrying. Make sure they are all aware of the weight of the hot tub and know how to handle it.

Second, rent a truck. A moving truck is not always necessary; you can rent a U-Haul van if you want to save money. Make sure you get the largest size that will fit your hot tub.

Third, remove any accessories from your hot tubs, such as seats or lights. It is also important to remove any chemical treatments before you begin moving it. This includes all forms and cushions.

Fourth, remove the cover and detach any wires or hoses. You will want to detach all of the hoses and wiring so that you can roll your hot tub without worrying about pulling on any wires. You should also detach the plumbing connections. This includes the pump, heater, and filter. You can disconnect these using a wrench or screwdriver.

Best way to move a hot tub

The best way of how to move a hot tub is to have it delivered. The company that delivers the hot tub should be able to provide the necessary equipment, manpower, and expertise to ensure a safe and successful move.

  • The first step is to remove any debris that might be in the way of the delivery truck’s path.
  • The second step is to plan out how the delivery will take place. It is also important to make sure that all utilities are not buried too deeply in the ground.
  • Next, inspect the property where the hot tub will be placed and make sure there is ample space for it. Finally, be sure to check the depth of the ground and how far it is from the house.

Planning Your Delivery Day

Once you have made sure that your hot tub is in good condition, there are a few things you can do to make sure that the delivery goes smoothly. The first thing you should do is make sure that your home is clean and clutter-free so it will be easy for the delivery team to maneuver around your home.

Also, if you have any pets or children, make sure that they are in a safe place while the delivery team is working. The next thing you want is for your children or pets to run into the middle of the delivery team while they are moving furniture and equipment around your home.

Cleaning Your Hot Tub After Delivery

After you have had your hot tub delivered, you will need to thoroughly clean it before using it for the first time. There are a few things you can do in order to make sure that your hot tub is clean and ready to use.

Clean the Water

When you first turn on your hot tub, you will need to let it run for at least 2 hours before adding any water to it. This allows time for the chemicals in the water to be balanced out and lets all of the air bubbles rise to the top so that they can be removed from the water. After this time has passed, you should remove all of the air from your hot tub.

This is done by adding a large amount of water to the hot tub and letting it run for at least 2 hours again. This time, you will want to remove all of the air bubbles from the water using an air compressor or a vacuum pump.

This is especially important for areas where there are many minerals in your water. These minerals can clog up your filters and pumps, which can result in a lot of problems down the road.

Hot tub Moving tips and tricks!

The tips and tricks are as follows:

  • Try to keep the hot tub filled with water
  • Don’t use any chemicals or cleaners in the hot tub during the move
  • Try to keep the hot tub in a closed box during the move
  • Use a dolly or hand truck to move it
  • Ask for help from friends and family

Conclusion

Moving a hot tub isn’t as easy as moving other types of furniture, but it can be done. Many people think the only way to move a hot tub is with a professional mover, but that’s not the case at all. With proper planning, you can easily move your hot tub yourself.

If you want to learn more about moving your own hot tub, we’re here to help you get your hot tub moved safely and efficiently so that it doesn’t cause damage to your property or inconvenience your family.

FAQs

What are important considerations in hot tub moving?

There are two important items that you need to consider when moving a hot tub. The first is getting the hot tub cover to stay in place and not leak water while you’re moving it. For this, it is helpful to use bungee cords or rope to secure the cover in place.

The second important consideration is making sure the area where you want to move the hot tub is clear of debris like rocks or sticks that could puncture the liner.

How to unplug your hot tub safely?

Hot tubs can be a lot of fun, but they pose a risk to people when not handled correctly. Safely unplugging your hot tub requires following these steps:

  1. The first thing that you need to do when you want to get the power turned off for your hot tub is to turn the breaker off of your circuit breaker. This can be done by flipping the switch on the panel in your home.
  2. Unplug the power cord from the outlet.
  3. Slowly open the hot tub lid and drain the water by using a hose or bucket to remove any debris that is in the water.
  4. Disconnect any hoses that are connected to the hot tub and put them on a safe surface.
  5. Disconnect the electrical connections to the hot tub and place them on a safe surface.
  6. Remove any pool chemicals that are in the hot tub, along with any other objects such as toys or towels.
  7. If you have an automatic chlorinator, unplug it from the outlet and remove it from the hot tub area, so that you can work safely on your hot tub without having to worry about being shocked by the water’s chlorine levels getting too high.

How to move a hot tub by yourself?

It’s not as hard as you might think.

  • Prep the hot tub for transport- remove everything from the hot tub and detach it from the existing plumbing.
  • Stack a few 2x4s on their ends next to the hot tub and keep them in place with a few bricks or blocks.
  • Lay the plywood on top of the 2x4s, and use more bricks or blocks to keep it in place.
  • Put an old rug under the plywood sheets to prevent damage to your lawn.
  • Put the hot tub on top of the plywood sheets.
  • Put another sheet of plywood on top of the hot tub, and put more bricks or blocks to keep it in place.
  • Attach a few straps to the hot tub, and use ratchet straps to attach them to your vehicle.
  • Hook up a car dolly or small trailer hitch behind your vehicle, and tow it away!
  • When you get to your new location, remove the bricks or blocks, and lift the plywood off.
  • Put the plywood and hot tub on a dolly or small trailer hitch, and tow it to your new location!

What not to do while moving a hot tub?

Some people don’t know how to correctly move a hot tub and end up causing some major damage. Here are some things that you shouldn’t do when you’re moving a hot tub:

  • First, don’t get it wet.
  • Don’t put a hot tub on the ground or on cement
  • Don’t put a hot tub in the sun or any other location that would cause it to be too hot
  • Don’t try to move it by yourself
  • Don’t move a hot tub with water in it!

What should be the weight of the hot tub?

The weight of a hot tub should depend on the water capacity. There are general guidelines for hot tub weight: For example, a 15,000-gallon spa has a maximum weight of about 3,000 pounds (1,360 kilograms) or a 20,000-gallon spa with a weight of about 4,000 pounds (1,800 kilograms).

A good rule of thumb to follow is to allow 12 pounds per US gallon (2.7 kilograms per liter) of water volume. The more gallons in your hot tub, the more weight it can hold.

Similar Posts

Leave a Reply

Your email address will not be published.