How to remove tub faucet

How to remove tub faucet

It’s supposed to be pleasant to take a bath, but a faulty faucet can prevent you from enjoying it and limit what you can do. Thankfully, breaking down and replacing your old tap is both a quick and cheap project which doesn’t require much in the way of equipment.

There are two different types of faucets – those which are connected by an on faucets) and those that connect using clips (slip-on faucets). Slip-on faucets are usually found on sink taps rather than bath taps.

Because tub faucets can make a splashy mess and be an annoyance, we’ve decided to show you how to fix them! Removing and replacing these parts is not complicated and requires minimal equipment.

How to remove tub faucet

Tools required for this project 

  • Putty knife
  • Allen wrench or hex key
  • Caulk gun
  • Screwdriver

Remove the stem and handle of your old faucet.

Step 1. Look at the screw under the faucet

When you are going to install a faucet, you will want to first make sure that you look at your water supply pipes and determine exactly what type of spout setup it has. Each faucet design is secure in different ways so you will want to ensure that the one you select has the kind of setup that lines up with how your pipes are connected.

Slip-on spouts will have a designated specifically for them under the spout near where it attaches to your supply pipe. If you see this, then you know that yours is a slip-on faucet. However, if there’s no hole in your faucet itself or under it, then chances are yours is a -on type instead.

Step.2 Scrape the caulk off the wall.

If there’s caulk on the wall that needs to be removed, scrape it off with a putty knife.

Step 3. You can use the wrench to loosen the screws

An Allen wrench or hex key will fit in the screws under your sink for removal. Insert the tool into one of the screws underneath and turn it counterclockwise to remove it. Remove the and set it aside.

Step 4. Now use can pull your faucet away from the wall

If your faucet is stuck in the wall, you may need to turn off the water supply before taking further measures, so that you do not have a flooded work area.

If your faucet isn’t budging from its position, then gently twist it from side to side until it begins to loosen around its middle edges. Then continue twisting on its side and pull out the entire faucet by grasping at the base of its neck and pulling it away from the wall.

Remove the Spout of your old faucet.

Step 1. Loose the screws underneath the spout of the faucet.

If the faucet doesn’t have screws underneath it, you can skip this step. However, if the faucet does, turn counterclockwise with an Allen wrench until it is loose enough so you can remove your spout from the pipe.

Step 2. Turn this spout clockwise 

To unscrew a faucet spout, use a pair of pliers to grip the spout with a tight grip and give it about 30 clockwise turns. Once the spout is just about to loosen, finish removing it from your wall by hand if doesn’t have s screw.

Step 3. Remember the length of the pipe

Mark the pipe that is underneath your faucet using a tape measure if possible. Write down the length of the pipe so you remember it later on when you’re contemplating your options. When you can buy your new spout.

Now it’s time to fix new stems and handles on your tub

Step 1. Purchase the new stems and handles.

Bring your old stems and handles with you when looking for a new faucet. Make sure the stems fit onto your existing pipes, and that the handles match up to any other style of bathroom fixtures. Select a kit that includes stems, handles, caps, and all other loose metal parts, which are commonplace in today’s day & age of fast-paced modern design.

These are available at home improvement and plumbing supply stores. When searching online, be sure to read all customer reviews for shopping confirmation first and foremost.

Step 2. Now, screw the stems into the pipe of the faucet.

When installing a faucet to an existing pipe, insert the threaded end into the hole where your old one was and turn it clockwise to tighten. Ensure that it is fully screwed in by hand first then use pliers to ensure that a secure seal has been made.

Step 3. The screw and stem slide it new handle on it

To start, the first thing you have to do is secure the stem inside your shower or tub. Once it’s correctly fitted in place, slide the new handle over the stem of your shower head and then push it back until it touches the wall, ensuring that it’s staying in place securely.

Then, grab your screwdriver and tighten it down your until it stays firmly put on the end of your shower head. Make sure to cover up your new handle with a snap cap once you feel confident with its placement so as to ensure you don’t get exposed to possibly toxic chemicals should you choose to change out the decorative items in your bathroom later on.

At last attached the spout on it 

Step 1. Purchase the new spout for your faucet tub.

Check out all of the tub spouts that your local home improvement store has to offer. Visit a few stores to see what you’ve got in stock and make sure that the style of each matches the handle in your bathroom sink too.

Be sure you account for how long your pipe is because if it isn’t long enough, the new spout simply won’t fit! The end of the pipe where you will be attaching the new spout should also match that as previously mentioned.

Step 2. Layer plumber’s tape over the pipe’s threading

Plumber’s tape creates an ideal seal for edges between your plumbing wall and the threaded pipe on your tub spout. If the plumber’s tape is not applied, tub water will leak from behind the wall and flood your bathroom floor. Remove 1-2 layers of plumber’s tape from its package.

Twist the end of a pipe wrench around the threading of piping coming out of your wall; use this to protect the end as you wrap plumber’s tape tightly over it. Wrap additional lengths around this same area in order to completely cover it; add more tape if needed. When finished, wrap one final layer before cutting off any excess.

 Step 3. Screw your new spout faucet

New spouts have an arrow on the side that indicates which direction to turn it. Place the new faucet on your pipe and slowly twist the new spout clockwise. Do not overtighten, as you may damage the pipes.

Continue in the new faucet until it becomes very difficult to turn. If the faucet is tilted in any way other than straight down, then fix this by unscrewing the faucet until it points down again.

Conclusion

In this article, we provide you with a complete step-by-step guide on How to remove the tub faucet or How to replace the tub faucet. We hope after reading this article you will be able to complete the work individually. Without calling a plumber.

Similar Posts

Leave a Reply

Your email address will not be published.